Many people consider the hoverboard as a fun toy, which is wrong. It is a device with which kids can travel in style from one place to another as well as be self-confident. A hoverboard with an easy-to-ride design as well as incredible features makes a great choice. However, it is important to note that this self-balancing scooter often faces issues. The best way to handle the minor hoverboard problems is the master reset.
For easy Hoverboard Repair, you can turn it off and put it on a flat surface. Hole the off/ on the button for around 10-12 seconds. And, turn on the device when a small red circle disappears. In case you still face problems, you need to pay attention. Here is a guide to common hoverboard problems and their solutions.
Hoverboard Not Turning On
The common reason behind this problem is no charging. Even after plugging charging, if you do not get the green light on the charger box, this means the internal circuits of the device have gone bad. Whereas, if you see a green light on the charger, turn on the scooter. If it flashes orange light, you would need to change the battery.
Red Light Error
In case the hoverboard flashes red light once, the device might have loose cables or wires. By unscrewing the device from below and then tightening the loose cables using a screwdriver, you can fix the problem. In case the red-light blinks two or three times, there might be an internal circuit problem. For fixing this, you might require a hoverboard circuit board replacement kit.
And, if the red-light blinks four to five times, it means there is a need if motor replacement. In case the red-light flashes more than five times, you might need to replace the battery or gyroscopes.
Light Stays On
In case the light of your hoverboard stays on and it doesn’t move, there are chances that one or both gyroscopes of the device have gone bad. Purchasing a new gyroscope and adding that to the device is the ideal hoverboard repair solution.
Locked Wheel
Many people face this problem of hoverboard wheel locked. The best way to get rid of this issue is to unassemble the wheel. Generally, this problem occurs when there is damage to self-balancing and that jams the space due to which the motor in self-balancing stops working. By replacing the washer, you can fix the problem.
Apart from these, there is one more common problem that is one side of the board not working. In most cases, this problem occurs due to a fault in the gyroscope. You can replace the gyroscope and solve the issue.
Writers Destination 